Rack Installation Instructions
FortiAnalyzer-2000B Version 4.0 MR1 Rack and Hardware Install Guide
Revision 1
http://docs.fortinet.com/
•
Feedback
Figure 5: Engaging and releasing the slam latch
16
•
The latches engage automatically as the system is pushed into the rack and are
released by pulling up on the latches (16).
•
To secure the system for shipment in the rack or for other unstable environments,
locate the hard-mount screw under each latch and tighten each screw with a #2
Phillips screwdriver (17).
6 To route the cables, do the following:
•
Locate the inner and outer CMA brackets on the interior sides of both rack flanges
(18).
15
17
11