This service manual does not describe SPECIFIC SERVICE INSTRUCTIONS.
3.1
Main body (Used figure are NX-F30E)
3.1.1 Removing the Top cover (See Fig.1 to 3)
(1) Remove the six screws A attaching the Top and Right cov-
er. (See Fig.1)
(2) Remove the Volume knob and Source knob.
(3) Remove the three screws B attaching the Right panel.
(See Fig.2)
(4) Slide to frontward and then remove the Right panel.
(5) Slide to backward and then remove the Side panel. (See
Fig.3)
(6) Slide to backward and then remove the Top cover.
3.1.2 Removing the Front panel (See Fig.4 to 7)
(1) Remove the three screws C attaching the Front panel.
(See Fig.4)
1-6 (No.MB695<Rev.001>)
SECTION 2
SPECIFIC SERVICE INSTRUCTIONS
SECTION 3
DISASSEMBLY
A
A
Fig.1
B
Fig.2
Fig.3
a
C
hook
Fig.4
(2) Disconnect the card wire from Main board connected to
connector
CN561
of the Front board. (See Fig.5)
(3) Remove the three screws D attaching the Front panel.
(See Fig.5)
D
Fig.5
C
CN561
D