JVC NX-F30B Service Manual page 13

3.2.5 Removing the tray assembly (See Fig.14 & 15)
(1) Remove the two screws J attaching the clamper base.
(See Fig.14)
(2) Remove the one screw K attaching the shaft guide from
bottom side. (See Fig.14)
J
order 1
clamper base
K
[bottom side]
order 2
Fig.14
(3) Remove the two screws L attaching the shaft guide from
top side. (See Fig.15)
Caution:
When attach the tray assembly, boss of loading sub as-
sembly should attach to guide of bottom side at tray as-
sembly. (See Fig.15)
L
Fig.15
(No.MB695<Rev.001>)1-13