Advertisement
This service manual does not describe SPECIFIC SERVICE INSTRUCTIONS.
3.1
Main body (Used figure are NX-PN7J)
3.1.1 Removing the Rear cabinet (See Fig.1, 2)
(1) Remove the thirteen screws A attaching the Rear cabinet.
(See Fig.1)
(2) Disconnect the card wire from LCD board connected to
connector
CN308
of the Main board. (See Fig.2)
(3) Disconnect the connector wire from LED board connected
to connector
CN713A
(4) Disconnect the connector wire from iPod board connected
to connector
CN710A
(5) Disconnect the connector wire from iPod board connected
to connector
CN711A
(6) Disconnect the connector wire from LED board connected
to connector
CN712A
(7) Disconnect the connector wire from Speakers connected to
connector
CN304
of the Main board. (See Fig.2)
SPECIFIC SERVICE INSTRUCTIONS
DISASSEMBLY
of the Main board. (See Fig.2)
of the Main board. (See Fig.2)
of the Main board. (See Fig.2)
of the Main board. (See Fig.2)
SECTION 2
SECTION 3
CN308
CN713A
A
A
Fig.1
CN710A
CN304
CN712A
Fig.2
(No.MB675<Rev.002>)1-7
CN711A
Advertisement
