JVC NX-F30B Service Manual page 10

3.2 DVD mechanism assembly
3.2.1 Removing the traverse mechanism (See Fig.1 to 6)
(1) Remove the two screws A attaching the tramecha holder
from top side of DVD mechanism assembly. (See Fig.1)
A
A
(2) Remove the two screws B attaching the DVD module
board. (See Fig.2)
B
DVD module board
1-10 (No.MB695<Rev.001>)
Clamper base
DVD mechanism assembly
Fig.1
DVD mechanism assembly
Fig.2
(3) Remove the four screws C attaching the CB holder and
take out it. (See Fig.3)
C
C
(4) Remove the four screws D attaching the traverse mecha-
nism. (See Fig.4)
Traverse mechanism assembly
D
B
DVD module board
C
C
Fig.3
DVD mechanism assembly
Fig.4
D