Table of Contents
Advertisement
Tap
and select
•
To resume the conversation tap
Using the display notepad
During a call you can enter a phone number or DTMF tone in the
display from the keypad as if it were a notepad. When you have
finished the call, the number remains in the display. To call the
number press
Switching DTMF tones on and off
DTMF tones can be turned off in the Phone menu for the benefit of
the remote party during a call.
To turn DTMF tones on or off:
Scroll to
1.
DTMF tones
press
. The current setting is highlighted.
Scroll to the desired setting and press
2.
Note:
Turning the DTMF tones on or off can only be achieved when
the call is active.
Sending DTMF tones
You can use your R380e to send DTMF (Dual Tone Multi Frequency)
tones. This feature may be used for a variety of purposes, such as
telephone banking or controlling an answering machine.
To send a DTMF number during a call:
During a call you can enter your DTMF code with the keypad.
•
The characters
the corresponding keys.
If you want to send a code using the pause function, for example your
personal access number, it is necessary to use the pause function.
Before you make the call, you enter both the phone number and the
code, separated by the pause character (
To send a code when making a call:
Enter the desired phone number.
1.
Press and hold
2.
Enter the code you want to send. The code can be any
3.
combination of the digits
Press
to make the call.
4.
When the call has been connected, the phone number disappears from
the display. After a delay of 3 seconds, the code is sent automatically,
character by character. While the code is being sent, the message
'Sending' appears in the display.
Mute microphone
.
in the
Phone menu
to
,
and
are used as DTMF tones by pressing
0
9
*
#
. The letter
to
0
9
.
appears in the display.
and select
using
.
).
p
appears in the display.
p
and the characters
Flip Closed
.
Turn off mute
or
, then
for pause.
*
33
Advertisement
Table of Contents
