Ericsson R380E User Manual page 180

180 Extras
To enter your internet e-mail network protocol, select
5.
then select
IMAP4
internet service provider.
Note: You cannot change the protocol setting for an account that
already exists.
To enter or change the user name required for accessing the
6.
incoming mail server, select
To enter or change the password required for accessing the
7.
incoming mail server, select
To enter or change the confirm password required for accessing
8.
the incoming mail server, select
new password (you chose in step 7).
To enter or change your outgoing mail server address, select
9.
Outgoing server:
To enter or change your incoming mail server address, select
10.
Incoming server:
To enter or change the e-mail address to which recipients will
11.
reply (by default this will be set to the address entered as "Owner
Address"), select
Tap to implement and save the new settings. The display
OK
12.
returns to the Messaging settings view.
To delete an e-mail account:
Select
1.
E-mail accounts
view. The E-mail accounts view appears in the display.
Select the account you want to delete. The Account (Name of
2.
account) view appears in the display.
Tap and select
3.
may occur when deleting an e-mail account from the device:
When attempting to delete a PC mail account, you are
•
informed that the selected account is a PC mail account and
asked if you would like to delete this account. Select
delete the account or
If you selected
account deletes all associated messages held on your R380e.
Select
Yes
to cancel deleting the account.
No
or . These settings are provided by your
POP3
Username:
Password:
and enter your new outgoing mail address.
and enter your new incoming mail address.
and enter a new reply to address.
Reply To:
from the list displayed in the Messaging
from the pop-up menu.The following
Delete
to return to the E-mail accounts view.
No
you informed that deleting the selected
Yes
to delete the account and all associated messages or
and enter a new user name.
and enter a new password.
Confirm password:
and
Protocol:
and enter the
to
Yes