Ericsson R380E User Manual page 190

190 Extras
To get information relating to the software versions:
Select
•
Software version
The Software version view appears in the display providing you
with information relating to the software versions on your R380e.
Software version
Phone:
Organiser:
Generate passcode
Generate passcode allows you to initiate the generating of an access
passcode (one-time passcode).
To generate an access passcode:
Tap Generate passcode on the Messaging desktop. The
1.
Generate access passcode view appears in the display.
Enter a Soft Token PIN code and tap
2.
passcode is displayed and copied to the clipboard, select
Note: The passcode copied to the clipboard can be used, i.e.when in
the WAP browser, by selecting the Paste command.
Generate passcode is only valid if the setup of secure access has
•
been performed. If secure access setup has not been performed,
then you will see the message "To generate a password you must
first enter the access password settings". Select
from the list displayed in the System view.
000119 1059 cxc112146 R1A
000302 1610 CXC112159 R1A
on the toolbar. The
OK
.
OK
.
OK