Table of Contents
Advertisement
10
Getting Started
To insert the battery:
Ensure that the flip is closed.
1.
First place the bottom of the battery into position and then push
2.
the upper section of the battery until it clicks into place.
To charge the battery using the charger:
Make sure the battery is attached to your R380e.
1.
Connect the charger to your R380e as follows:
2.
The flash symbol
•
Locate the flash symbol by the R380e connector.
•
Tilt the R380e plug contacts slightly downwards when
•
inserting into the R380e connector.
Move the R380e plug downwards so that it fits securely with
•
the R380e connector.
Connect the charger to the mains.
3.
To remove the plug:
Tilt the plug upwards and pull it away from the R380e connector.
•
on the R380e plug must face upwards.
Advertisement
Table of Contents
