Flip Open - Ericsson R380E User Manual

Emergency
calls only
12:00
No network
18-05-2000
12:00
14 Getting Started
Note: See "Troubleshooting" on page 201 if you do not reach
standby mode.
When in the 'Standby mode' you can make and receive calls, use the
Phone book to make a call, view e-mail and SMS messages, view the
current days events, appointments and to-dos and activate/deactivate
a limited number of settings.
Other modes
If the name of a network does not appear in the display it may be due
to one of the following reasons:
Emergency calls only
If '
Emergency calls only
network but you are not allowed to use that network. However, in an
emergency, you can call the appropriate international emergency
number. Furthermore the light indicator on top of the R380e does not
flash.
Note: This service is network dependant, not all networks will allow
you to make an emergency call.
Note: Emergency calls can be made when the key lock is on.
No network
If ' ' is displayed, there is no network coverage within
No network
range, or the received signal is too weak, in which case you will have
to move to obtain a sufficiently strong signal. Notice that the network
strength indicator, at the bottom to the left of the display, is reduced
to a dashed line. Furthermore the light indicator on top of the R380e
does not flash.

Flip open

On opening the flip, software is presented on the desktop as program
tabs, icons and functions. The stylus provided is used to operate the
software by tapping the touch sensitive screen for selection.
' is displayed, you are within coverage of a