Ericsson R380E User Manual page 178

178 Extras
To initialize or re-initialize the RSA SecurID:
Select
•
Initialise RSA SecurID
passcodes view.
If no previous initialisation has been performed, the Initialise RSA
SecurID view appears in the display. Select the
Activation licence:
the seed data in their respective sections, then tap
the entered values cannot be validated a warning message appears
stating which value was incorrect. Otherwise, an information view
appears informing you that "RSA SecurID has been successfully
initialised". Select
If initialisation has already been performed, a Re-Initialise
confirmation message appears stating that the "Current
initialisation data will be lost" and asking "Are you sure?". Select
if you want to retain the previous initialisation and return to the
No
One-time passcodes view. Otherwise, select
RSA SecurID view appears in the display. Change the
initialisation data as described above.
To initialize or re-initialize Safeword:
Select
1.
Initialise Safeword
passcodes view. The Initialise Safeword view appears in the
display.
Select
2.
Serial number:
and then tap
sections a warning view appears stating which value is incorrect.
Otherwise, a second Initialise safeword view appears in the
display.
Select
3.
Key phrase:
phrase is incorrect a warning message appears in the display.
Otherwise, a third Initialise Safeword view appears in the display.
Select
4.
User ID:
Select
5.
Choose PIN:
Select
6.
Confirm PIN:
previous step and then tap
user ID is incorrect a warning message appears in the display.
Otherwise, you will see a message confirming that the Safeword
has been successfully initialised. Select
time passcodes view. Change Safeword PIN appears in the
display.
from the list displayed in the One-time
sections and enter your user identification and
to return to the One-time passcodes view.
OK
from the list displayed in the One-time
and
Authorisation code:,
. If there is an incorrect value in any of the
OK
, enter the key phrase and then tap
and enter your user identification.
and enter a PIN.
, then enter the PIN that was entered in the
. If the PIN's do not match or the
OK
and
User ID:
. If any of
OK
. The Initialise
Yes
enter the required data
. If the key
OK
to return to the One-
OK