Input Function Default And Possible Settings; The Other Setup Menu - Pioneer VSX-82TXS Operating Instructions Manual

Other Settings
09
• 12V Trigger 1 / 2 – After connecting a component to
one of the 12 volt triggers (see Switching components
on and off using the 12 volt trigger on page 60), select
M. ROOM, ROOM2, ROOM3 or OFF for the
corresponding trigger setting to switch it on
automatically along with the (main or sub) room
specified.
• PDP In (SR+) – To control certain functions on this
receiver from a plasma display, select the display
input to which you've connected the receiver.
7 When you're finished, press RETURN.
You will return to the System Setup menu.

Input function default and possible settings

The terminals on the rear of the receiver generally
correspond to the name of one of the input source
functions. If you have connected components to this
receiver differently from (or in addition to) the defaults
below, see The Input Setup menu above to tell the
receiver how you've connected up. The dots ( ) indicate
possible assignments.
Input
source
Digital i.LINK
DVD/LD COAX 1
TV
SAT OPT 1
DVR/VCR1 OPT 2
DVR/VCR2 OPT 3
VIDEO/GAME1
VIDEO/GAME2
(Fixed)
HDMI 1
HDMI 2
HDMI 3
HDMI 4
(VSX-84TXSi )
USB
XM
CD COAX 2
CD-R/TAPE/MD OPT 4
TUNER
PHONO
MULTI CH IN
iPod
iLINK
Note
1 You will have to make an SR+ cable connection from a CONTROL OUT jack on the display to the CONTROL IN jack on this receiver (opposite from the
setup in Using this receiver with a Pioneer plasma display on page 60). Note that to control this receiver using the remote, you will have to point it at the
plasma display's remote sensor after making this connection.
64
En
1
Input Terminals
HDMI Component S-Video
IN 1
IN 2
(Fixed)
(Fixed)
(Fixed)
(
HDMI-1 )
( HDMI-2 )
(
HDMI-3 )
( HDMI-4 )

The Other Setup menu

The Other Setup menu is where you can make
customized settings to reflect how you are using the
receiver.
SYSTEM OFF
INPUT
RECEIVER SOURCE
SELECT
CD TV VIDEO 2
DVD SAT VIDEO 1 TV CONT
DVR2
CD-R XM RADIO ROOM2/3
DVR1 i Pod TUNER RECEIVER
SLEEP VIDEO ANALOG
1 Switch on the receiver and your TV.
RECEIVER button to switch on.
Use the
2 Press RECEIVER on the remote control, then press
the SETUP button.
An on-screen display (OSD) appears on your TV. Use the
buttons and ENTER to navigate through the
screens and select menu items. Press RETURN to
confirm and exit the current menu.
3 Select 'Other Setup' then press ENTER .
System Setup
1.Auto MCACC
2.Surr Back System
3.Manual MCACC
4.Data Management
5.Manual SP Setup
6.Input Setup
7.Other Setup
: Exit
4 Select the setting you want to adjust.
If you are doing this for the first time, you may want to
adjust these settings in order:
• Multi Room Setup – Specify your volume setting for
a multi-room setup (see Multi-Room Setup below).
• SR+ Setup – Specify how you want to control your
Pioneer plasma display (see SR+ Setup for Pioneer
plasma displays below).
• OSD Adjustment – Adjust the position of the on-
screen display on your TV (see OSD Adjustment
below).
• iLINK Check (VSX-84TXSi only) – Check which i.LINK-
equipped components you have connected, and
which input function they are assigned to (Checking
the i.LINK inputs on page 52).
5 Make the adjustments necessary for each setting,
pressing RETURN to confirm after each screen.
D.ACCESS CLASS
+10
DISC
ENTER
AV PARAMETER CH LEVEL
TOP MENU MENU
TUNE
ST ST
DTV MENU T.EDIT
ENTER
SETUP SETUP RETURN RETURN
TUNE
CATEGORY
BAND
GUIDE
TV CONTROL
INPUT
VOL
TV VOL TV CH
SELECT
7.Other Setup
a.Multi Room Setup
b.SR+ Setup
c.OSD Adjustment
d.i.LINK Check
:Return