Display - Pioneer VSX-82TXS Operating Instructions Manual

Controls and displays

Display

1 2
SIGNAL
L C
AUTO
SL S
HDMI
SBL SB
DIGITAL
LFE
ANALOG
STREAM DIRECT
eo
2 PRO LOGIC
N
THX ADV.SURROUND
STEREO STANDARD
AB
SP SLEEP
12 13 14 15
1 SIGNAL indicators
Light to indicate the currently selected input signal.
AUTO lights when the receiver is set to select the input
signal automatically (page 30).
2 Program format indicators
These change according to which channels are active in
digital sources.
L – Left front channel
C – Center channel
R – Right front channel
SL – Left surround channel
S – Surround channel (mono)
SR – Right surround channel
SBL – Left surround back channel
SB – Surround back channel (mono)
SBR – Right surround back channel
LFE – Low frequency effects channel (the ((( ))) indicators light when
an LFE signal is being input)
3 Digital format indicators
Light when a signal encoded in the corresponding format
is detected (DSD PCM lights during DSD (Digital
Stream Direct) to PCM conversion with SACDs).
4 OVER / ATT
OVER lights to indicate that the level of an analog source
is too high. ATT lights when you use the attenuator
(ANALOG ATT) to reduce it.
5 MULTI-ROOM
Lights when the multi-room feature is active (page 57).
6 VIDEO CONV.
Lights when digital video conversion is switched on (see
Setting the AV options on page 66).
7 V.SB
Lights during Virtual surround back processing
(page 30).
8 Sound processing indicators
Light according to the active AV parameter(s) (page 66).
9 TUNER indicators
TUNED – Lights when a broadcast is being received.
3 4 5
2 DIGITAL DTS VIDEO
R
MULTI-ROOM
WMA9 Pro 96/24
SR
DSD PCM OVER ATT
SBR
CD TUNER MULTI IN
CD-R PHONO
: 6
16
6 7 8
CONV. V.SB DNR MIDNIGHT TUNED
DIALOGUE LOUDNESS STEREO
Hi-bit/sampling TONE MONO
DVD SAT VIDEO
iPod TV DVR [ 1
17
STEREO – Lights when a stereo FM broadcast is
being received in auto stereo mode.
MONO – Lights when the mono mode is set using
the MPX button.
10 Master volume level
Shows the overall volume level. –80dB indicates the
minimum level, and +12dB indicates the maximum level.
11 Input source indicators
Light to indicate the input source you have selected.
12 STREAM DIRECT
Lights when Direct / Pure Direct is selected (page 29).
13 Speaker indicators
Lights to indicate the current speaker system, A and/or B
(page 55).
14 Listening mode indicators
THX – Lights when one of the Home THX modes is
selected.
ADV. SURROUND – Lights when one of the
Advanced Surround modes has been selected.
STEREO – Lights when stereo listening is switched
on (see Listening in stereo on page 29).
STANDARD – Lights when one of the Standard
Surround modes is switched on (see Listening in
surround sound on page 27).
15 SLEEP
Lights when the receiver is in sleep mode (page 68).
16 Matrix decoding format indicators
2PRO LOGIC IIx – This lights to indicate 2Pro
Logic II / 2Pro Logic IIx decoding (page 27).
Neo:6 – When one of the Neo:6 modes of the receiver
is on, this lights to indicate Neo:6 processing
(page 27).
17 Character display
Displays various system information.
18 SR+
Lights when the SR+ mode is switched on (page 61).
9 10 11
dB
HDMI USB XM
3 4
] [ 2 ] [ ] [ ]
SR+
18
04
23
En