Other Settings; The Input Setup Menu; Input Function Default And Possible Settings - Pioneer Elite VSX-91TXH Operating Instructions Manual

Other Settings

09
Chapter 9:
Other Settings

The Input Setup menu

You only need to make settings in the Input Setup menu
if you didn't hook up your digital equipment according to
the default settings (see Input function default and
possible settings below). In this case, you need to tell the
receiver what equipment is hooked up to which terminal
so the buttons on the remote correspond to the
components you've connected.
1 Press RECEIVER on the remote control, then press
the SETUP button.
An on-screen display (OSD) appears on your TV. Use the
/// buttons and ENTER to navigate through the
screens and select menu items. Press RETURN to
confirm and exit the current menu.
2 Select 'Input Setup' from the System Setup menu.
System Setup
1.Auto MCACC
2.Surr Back System
3.Manual MCACC
4.Data Management
5.Manual SP Setup
6.Input Setup
7.Other Setup
3 Select the input function that you want to set up.
The default names correspond with the names next to the
terminals on the rear panel (such as DVD/LD or VIDEO/
GAME) which, in turn, correspond with the names on the
remote control.
6.Input Setup
Input
Digital In
Component In [ Comp-2
(
4 Select the input(s) to which you've connected your
component.
For example, if your DVD player only has an optical
output, you will need to change the DVD/LD input
function's Digital In setting from COAX 1 (default) to the
optical input you've connected it to.The numbering
(OPT1 to 4) corresponds with the numbers beside the
inputs on the back of the receiver.
Note
1 For high-definition video (using component video connections), or when digital video conversion is switched off (in Setting the AV options on page 63),
you must connect your TV to this receiver using the same type of video cable as you used to connect your video component.
2 You will have to make an SR+ cable connection from a CONTROL OUT jack on the display to the CONTROL IN jack on this receiver (opposite from the
setup in Using this receiver with a Pioneer plasma display on page 57
plasma display's remote sensor after making this connection.
60
En
6.Input Setup (1/2)
Input DVD
Digital In [ COAX-1
Component In [ Comp-2
( Next )
: Exit :Finish
(1/2) 6.Input Setup (2/2)
DVD ( Back)
PlayStation
[ COAX-1 ] Input Name Default
] 12V Trigger [ ON
PDP In (SR+) [ Input-1
Next )
:Finish :Finish
• If you change the setting to an input that has been
previously assigned to another function (for example,
TV/SAT) then the setting for that function will
automatically be switched off.
• If you used component video cords to connect your
component you must tell the receiver which input you
connected it to, or else you may see the S-video or
composite video input instead of the component
video signal.
5 When you're finished, select 'Next' to continue to
the next screen.
The second screen of the Input setup has two optional
settings:
• Input Name – You can choose to rename the input
function for easier identification. Select Rename to
do so, or Default to return to the system default.
• 12V Trigger – After connecting a component to the
12 volt trigger (see Switching components on and off
using the 12 volt trigger on page 57), select MAIN, Z2
]
or OFF to switch it on automatically along with the
]
room specified.
• PDP In (SR+) – To control certain functions on this
receiver from a plasma display, select the display
input to which you've connected the receiver.
6 When you're finished, press RETURN.
You will return to the System Setup menu.

Input function default and possible settings

The terminals on the rear of the receiver generally
correspond to the name of one of the input source
functions. If you have connected components to this
]
receiver differently from (or in addition to) the defaults
]
below, see The Input Setup menu above to tell the receiver
how you've connected up. The dots (
assignments.
Input source
DVD/LD
TV/SAT
DVR/VCR1
DVR/VCR2
)
. Note that to control this receiver using the remote, you will have to point it at the
1
) indicate possible

Input Terminals
Digital Component
COAX 1
OPT 2
OPT 1
COAX 2
2



