Using The Xm Menu; Connecting Using Hdmi - Pioneer VSX-82TXS Operating Instructions Manual

Other connections
08
Listening to channel presets
You will need to have some presets stored to do this.
1 Press CLASS to select the class in which the channel
is stored.
Press repeatedly to cycle through classes A, B and C.
2 Press to select the channel preset you want.
• You can also use the number buttons on the remote
control to recall the channel preset.

Using the XM Menu

The XM Menu provides additional XM Radio features.
1 Press TOP MENU .
2 Use to select a menu item then press ENTER .
Choose between the following menu items:
• Memory Recall – Use
song information (see Tip above).
• Channel Skip/Add – Use
channels you would like to remove/restore from/to
the channel guide.
• Antenna Aiming – Check the strength of satellite
and terrestrial reception.
3 When you're finished press TOP MENU to return to
the reception display.
Connect & Play™, XM-Ready
trademarks of XM Satellite Radio Inc. ©2005 XM Satellite
Radio Inc. All rights reserved. All other trademarks are the
property of their respective owners.
Note
1 • An HDMI connection can only be made with DVI-equipped components compatible with both DVI and High Bandwidth Digital Content Protection
(HDCP). If you choose to connect to a DVI connector, you will need a separate adaptor (DVI
audio signals. Consult your local audio dealer for more information.
• This unit has been designed to be compliant with HDMI (High Definition Multimedia Interface) Version 1.2. Depending on the component you have
connected, using a DVI connection may result in unreliable signal transfers. Also, when using a component with HDMI version 1.0, it is not possible to
output copy-controlled DVD-Audio CPPM sources from the HDMI connection.
50
En
to browse your saved
and ENTER to select
®
and The Ultimate Playlist are

Connecting using HDMI

If you have a HDMI or DVI (with HDCP) equipped compo-
nent, you can connect it to this receiver using a commer-
cially available HDMI cable.
The HDMI connection transfers uncompressed digital
video, as well as almost every kind of digital audio that the
connected component is compatible with, including
DVD-Video, DVD-Audio (see below for limitations), Video
CD/Super VCD, CD and MP3. See About the video
converter on page 11 for more on HDMI compatibility.
HDMI/DVI-equipped component
HDMI OUT
MULTI-ROOM IR
MULTI-ROOM
& SOURCE
& SOURCE
/ REC SEL
MAIN ROOM(ZONE1)
OUT1
S400
ROOM3
(ZONE3)
IN1
(AUDIO)
ROOM2(ZONE2)
OUT2
IN2
S400
USB
AUDIO 12 V TRIGGER
HDMI
IN
IN1
1
IN 1 (DC OUT 12V TOTAL 50 mA MAX)
(SAT)
ROOM2 MULTI-ROOM
IN 2
IN2 (ZONE2)
(DVR/
VCR 1)
IN 1
Y
IN 3
(DVR/
VCR 2)
IN 4 IN3 P
B
(CD-R)
1 4
ASSIGNA-
BLE
P
R
IN 1 1 2
(DVD/
IN4
LD) IN 2
Y
IN 2
(CD)
P
B
OUT
IN
P
R
XM
ASSIGNABLE
DIGITAL COMPONENT VIDEO
HDMI IN
HDMI/DVI-compatible monitor
or plasma display
1 Use an HDMI cable to connect on of the HDMI IN
interconnects on this receiver to an HDMI output on
your HDMI component.
HDMI appears on the front panel when an HDMI-
equipped component is connected.
HDMI) to do so. A DVI connection, however, does not support
1
AUDIO
ANTENNA
PHONO
AM LOOP
FM UNBAL 75 Ω
IN
MULTI-ROOM & SOURCE
MONITOR
OUT
OUT
R ROOM2(ZONE2) L
CD
OUT IN
DVD/
2
LD
IN 1
IN
OUT
& SOURCE
TV
MONITOR IN
IN 2
OUT
CD-R/
TAPE
OUT
(DVD/LD)
IN 1
SAT
Y
2 (TV) IN
IN
IN
R
1 2
ASSIGNABLE
FR FL
VIDEO /
P
B GAME1
IN
SUB W. C
P OUT
R
SUR-
DVR/
ROUND
VCR 1
IN 3
Y IN
R
OUT
P
B
DVR/
R
SURROUN
VCR 2
BAC
P
IN
R MUL
IN
OUT
S - VIDEO R L
VIDEO
1 3
CONTROL
VIDEO AUDIO
VSX-84TXSi