Programming A Different Component Into A Multi Control Button (Vsx-709Rds); Checking Preset Code (Vsx-709Rds) - Pioneer VSX-609RDS Operating Instructions Manual

Programming a Different Component into a MULTI
CONTROL Button (VSX-709RDS)
This feature changes a selected MULTI CONTROL button to a different component. For example, if you don't
have a second TV, but you do have a second VCR, you could reassign the TV MULTI CONTROL to VCR so that
VCR control buttons are available when you select TV.
SOURCE RECEIVER
DVD TV VCR CD-R
MULTI CONTROL
RCV CD TUN TVC
3
1 2 3
MIDNIGHT 5.1CH ATT
4 5 6
SIGNAL SELECT EFFECT
7 8 9
+10 0 DISC
TV CONTROL
TV
7
4 ¢
2
DSP TEST TONE
CH SELECT CH LEVEL FL DIMMER
LOUDNESS FUNCTION MUTING SETUP
Î

Checking Preset Code (VSX-709RDS)

SOURCE RECEIVER
DVD TV VCR CD-R
MULTI CONTROL
RCV CD TUN TVC
4
1 2 3
MIDNIGHT 5.1CH ATT
4 5 6
7
SIGNAL SELECT EFFECT
7 8 9
0
+10 DISC
TV CONTROL
TV
7
4 ¢
2
DSP TEST TONE
CH SELECT CH LEVEL FL DIMMER
LOUDNESS FUNCTION MUTING SETUP
Î
1 Press SETUP and hold for three seconds.
LED
The LED will blink twice.
2
2 Press the MULTI CONTROL button which you
want to change.
For the example above, press VCR.
3
3 Press 9, 9, 2.
4 Press the MULTI CONTROL button which you
want to be duplicated.
In the above example, press TV. The LED will blinks twice. The TV
1
button will not now make the remote function as a VCR controller.
Remember to assign the correct preset code for your equipment.
The default is Pioneer equipment.
To check which preset code is associated with a MULTI CONTROL
button:
1 Press SETUP and hold for three seconds.
LED
The LED on the remote control will blink twice.
2
2 Press the MULTI CONTROL button you want
6
to check the preset code for.
5
3
3 Press 9, 9, 0.
3
Each preset code consists of four digits, for example 1329. Each
digit will be represented by a series of blinks on the remote
control's LED.
4 Press 1 to check to see the left-most digit.
1
In above example, the LED blinks once to see that the code of the
left-most digit is "1".
5 Press 2.
In above example, the LED blinks three times.
6 Press 3.
In above example, the LED blinks twice.
7 Press 4 to check to see the right-most digit.
In above example, the LED blinks nine times.
Preparations
27
En