Programming A Different Component Into A Multi Control Button - Pioneer VSX-D709S Operating Instructions Manual

Remote Control of Other Components
Programming a Different Component into a MULTI
CONTROL button
This feature changes a selected Multi Control button to a different component. For example, if you don't have a
second TV, but you do have a second DVD, you could reassign the TV Multi Control to DVD so that the DVD
control buttons are available when you select TV.
SOURCE RECEIVER
DVD TV
MULTI CONTROL
CD CD-R
4
1 2
LOUDNESS VIDEO SELECT
4 5
2
INPUT ATT DIGITAL NR
7 8
REMOTE SETUP SYSTEM SETUP SIGNAL SELECT
+10
0
EFFECT/CH SEL
1
RECEIVER
TV VOL TV
TV CONTROL
TVFUNK
4
58
1 Press RECEIVER.
2 Press REMOTE SETUP and hold for three
3,5
VCR VCR
1 2
TUN TVC
3
MULTI CH INPUT
6
FL DIMMER 3 Press the MULTI CONTROL button which you
4
9
DISC
ENTER
MASTER VOLUME
4 Press 9, 9, then 2.
¢
5 Press the MULTI CONTROL button which you
seconds.
The LED on the remote will blink twice.
want to change.
For the example above, press TV.
The LED will blink twice.
want to be duplicated.
In the above example, press TV. The LED will blinks twice. The TV
button will now make the remote function as a DVD controller.
Remember to assign the correct preset code for your equipment
(the default is for Pioneer equipment).