Antennas - Pioneer VSX-609RDS Operating Instructions Manual

Connecting Your Equipment

Antennas

Hook up the supplied radio antennas as shown below.
Assemble the antenna.
Attach to a wall, etc. (if desired) and
face toward the direction providing
the best reception.
Using external antennas
7 To improve FM reception
Connect an external FM antenna.
PAL connector
75 coaxial cable
7 Speaker terminals
1 Twist exposed wire
strands together.
2 Loosen speaker
terminal and insert
exposed wire.
VSX-709RDS only
12
En
AM loop antenna
7 To improve AM reception
Connect a 5 – 6 meter length of vinyl-coated wire to the AM
antenna terminal without disconnecting the supplied AM loop
antenna.
For the best possible reception, suspend horizontally outdoors.
Indoor antenna
(Vinyl-coated
10 mm
3 Tighten terminal.
FM wire antenna
Twist exposed wire strands
together and insert into the
hole, then snap the connector
shut.
Connect the FM wire
antenna and fully extend
vertically along a window
frame, etc.
Outdoor antenna
wire)
Use good quality speaker wire to
connect the speakers to the
receiver.
1 Twist around 10 mm of bare
wire strands together.
2 Unclip the speaker terminal
and insert the wire.
3 Snap shut the speaker termi-
nal to secure.
10mm
5 – 6 m
ª
·