Using The Sr+ Mode With A Pioneer Plasma Display; Connecting A Pc For Advanced Mcacc Output - Pioneer Elite VSX-91TXH Operating Instructions Manual

Other connections
08
Important
• If you connect to a Pioneer plasma display using an
SR+ cable, you will need to point the remote control
at the plasma display remote sensor to control the
receiver. In this case, you won't be able to control the
receiver using the remote control if you switch the
plasma display off.
• Before you can use the extra SR+ features, you need
to make a few settings in the receiver. See The Input
Setup menu on page 60 and SR+ Setup for Pioneer
plasma displays on page 61 for detailed instructions.
• Use a 3-ringed miniplug SR+ cable to connect the
CONTROL IN jack of this receiver with the CONTROL
OUT jack of your plasma display.
VIDEO
INPUT 1
DVD player
DVD/LD
AUDIO IN
STANDBY / ON
MULTI ZONE LISTENING
ON/OFF CONTROL MODE
MULTI JOG ENTER
To make the most of the SR+ features, you should
connect your source components (DVD player, etc.) in a
slightly different way to that described in this chapter. For
each component, connect the video output directly to the
plasma display, and just connect the audio (analog and/
or digital) to this receiver.
Using the SR+ mode with a Pioneer
plasma display
When connected using an SR+ cable, a number of
features become available to make using this receiver
with your Pioneer plasma display even easier. These
features include:
58
En
VIDEO
Pioneer plasma
INPUT 2
display
Satellite receiver, etc.
TV/SAT
AUDIO IN
PHASE
CONTROL
SIGNAL SB ch
DVD/LD TV/SAT DVR 1/DVR 2 VIDEO/GAME CD CD-R / TAPE / MD FM/AM XM SIRIUS iPod HDMI
SELECT PROCESSING
S-VIDEO VIDEO/GAME INPUT MCACC
VIDEO L AUDIO R DIGITAL IN SETUP MIC
PHONES
SYSTEM TUNING/ TUNER
SETUP RETURN TONE STATION EDIT SPEAKERS
MULTI JOG
This receiver
• On-screen displays when making receiver settings,
such as speaker setup, MCACC setup, and so on.
• On-screen volume display.
• On-screen display of listening mode.
• Automatic video input switching on the plasma
display.
• Automatic volume muting on the plasma display.
See also SR+ Setup for Pioneer plasma displays on
page 61 for more on setting up the receiver.
Important
• The additional SR+ features do not work when the
iPod, XM or SIRIUS Radio function is selected.
1 Make sure that the plasma display and this receiver
are switched on and that they are connected with the
SR+ cable.
See Using this receiver with a Pioneer plasma display
above for more on connecting these components.
• Make sure you have also selected the display input to
which you've connected the receiver in The Input
Setup menu on page 60.
2 To switch SR+ mode on/off, press RECEIVER, then
the SR+ button.
The front panel display shows SR+ ON or SR+ OFF.
VSX-91TXH
• The automatic volume muting feature is enabled
separately; see SR+ Setup for Pioneer plasma displays
MULTI CH
IN
on page 61.
MASTER
VOLUME
Connecting a PC for Advanced MCACC
output
If you use the Professional Acoustic Calibration EQ (see
page 39) to measure the reverb characteristics of your
listening room, you can check the results graphically
using a computer connected to this receiver. Use a
commercially-available RS-232C cable to connect the RS-
232C jack on your computer to the 9-pin RS-232C jack on
the back panel of this receiver (the cable must be cross
type, female–female).
The software to output the results is available from the
support area of the Pioneer website (http://
www.pioneerelectronics.com/pna/ci/codes/
0,,2076_262707270,00.html). Instructions for using the
software are also available here. Please contact the
Customer Support Division of Pioneer if you have any
questions or concerns.
XM RADIO SIRIUS DVR 2
DVD TV DVR 1 TV CTRL
CD-R/TAPE HDMI 2 CD ZONE 2
iPod HDMI 1 TUNER RECEIVER
SLEEP S.RETRIEVER ANALOG
ATT
SR+ DIMMER MIDNIGHT/
LOUDNESS
DIALOG E