Adding A License File; Adding A 9600 Series Screen Saver File; Adding Music On Hold Files - Avaya IP500 Installation Manual

4.4.4 Adding a License File

For IP500v2 control units, if a licence file called keys.txt is found in the SD card folder which the IP Office uses when it
boots, the IP Office will merge the licenses in that file with its configuration.
The files should be a plain text file (UTF8) containing either:
· A license name and license key separated by a
comma on each line.
· A license key on each line.
1. Using a card reader, copy the file into the /system/primary folder on the System SD memory card.

4.4.5 Adding a 9600 Series Screen Saver File

When idle, 9600 Series phones can timeout to displaying a screen saver image. A file, 96xxiposs.jpg, is present on the
cards by default.
You can replace this file with your own branded file. The file should be smaller than the screen size on 9600 Series phones
in order to then be moved around the screen.
Phone Maximum Size
9620 232 x 69
9620L 232 x 69
9620C 232 x 69
· Color Displays: Color depth is 16 bit. A separate color image will look best.
· Non-Color Displays: Best results are achieved with a single grayscale logo image. 2 levels of grayscale are also
supported.
· To invoke transparent backgrounds with logos, use a background color of 0,255,0 (brightest possible green).

4.4.6 Adding Music on Hold Files

By default the IP Office will use internal music on hold by uploading a music file from the IP Office Manager PC. For
IP500v2 systems, you can load a file onto the System SD card prior to installing it in the IP Office.
The file must be of the following format and must be called holdmusic.wav.
Property
File Type
Bit Rate
Audio sample size
Channels
Audio Sample Rate
Audio Format
Length
1. Rename the music file holdmusic.wav.
2. Using a card reader, copy the file into the /system/primary folder on the System SD memory card.
3. If the IP Office is or will be configured for additional hold music files (up to 3 additional files), copy those files to the
same location. The name of the additional files must match those specified in the IP Office system's configuration.
IP500/IP500 V2 Installation
IP Office 8.0
Teleworker, uAuToY@9VvVV@VOzIgeegwLXL2sAs1Z5
Mobile Worker, NvWO_iVY5KJpZMNeY89IB1sIj0_QUCDm
Power User, 9IJQW3yuPsbxjGS2XcMa16_J9H8cSeZ9
System Advanced, JAWZaw@YtK37vcnXkqM4mDYDIdSMd9_1
uAuToY@9VvVV@VOzIgeegwLXL2sAs1Z5
NvWO_iVY5KJpZMNeY89IB1sIj0_QUCDm
9IJQW3yuPsbxjGS2XcMa16_J9H8cSeZ9
JAWZaw@YtK37vcnXkqM4mDYDIdSMd9_1
Phone Maximum Size
9621G 350 x 153
9630 232 x 140
9640 232 x 140
Value
WAV
128kbps
16 bit
1 (mono)
8 kHz
PCM
Up to 90 seconds.
IP500 V2 Installation: SD Card Preparation
Phone Maximum Size
9641G 480 x 272
9650 232 x 140
9650C 232 x 140
15-601042 Issue 25i (03 January 2013)
Page 79