Dodge Challenger 2016 Operating Information Manual page 71

Illuminated Vanity Mirrors
An illuminated vanity mirror is on the sun visor.
To use the mirror, rotate the sun visor downward
and swing the mirror cover upward. The light
turns on automatically. Close the mirror cover to
turn off the light.
Illuminated Vanity Mirror
"Slide-On-Rod" And Extender
Features Of Sun Visor
To use the "Slide-On-Rod" feature of the sun
visor, rotate the sun visor downward and swing
the sun visor so it is parallel to the side window,
grabbing the sun visor with your left hand pull
rearwards until the sun visor is in the desired
68
position. To use the extender feature of the sun
visor, grab the extender which is located at the
rear of the visor and pull rearward.
Slide-On-Rod Extender
BLIND SPOT MONITORING
(BSM) — IF EQUIPPED
The Blind Spot Monitoring (BSM) system uses
two radar-based sensors, located inside the
rear bumper fascia, to detect highway licens-
able vehicles (automobiles, trucks, motor-
cycles, etc.) that enter the blind spot zones from
the rear/front/side of the vehicle.
Rear Detection Zones
When the vehicle is started, the BSM warning
light will momentarily illuminate in both outside
rear view mirrors to let the driver know that the
system is operational.
Automatic Transmission Vehicles
The BSM system sensors operate when the
vehicle is in any forward gear or REVERSE and
enters stand-by mode when the vehicle is in
PARK.