Dodge Challenger 2016 Operating Information Manual page 173

touchscreen, until a check-mark appears next
to setting, indicating that the setting had been
selected.
• Hill Start Assist — If Equipped
When this feature is selected, the Hill Start
Assist (HSA) system is active. Refer to "Elec-
tronic Brake Control System" in "Starting And
Operating" for system function and operating
information. To make your selection, press the
"Hill Start Assist" button on the touchscreen,
until a check-mark appears next to setting,
indicating that the setting had been selected.
Lights
After pressing the "Lights" button on the touch-
screen the following settings will be available.
• Headlight Off Delay
When this feature is selected, it allows adjust-
ment of the amount of time the headlights
remain on after the engine is shut off. To change
the Headlights Off Delay setting, press the "+"
or "-" button on the touchscreen to select your
desired time interval, and choose either 0, 30,
60 or 90 seconds.
170
• Headlight Illumination On Approach
When this feature is selected, the headlights will
activate and remain on for 0, 30, 60 or 90
seconds when the doors are unlocked with the
Remote Keyless Entry (RKE) transmitter. To
change the Illuminated Approach status, press
the "+" or "-" button on the touchscreen to select
your desired time interval.
• Headlights With Wipers — If Equipped
When this feature is selected, and the headlight
switch is in the AUTO position, the headlights
will turn on approximately 10 seconds after the
wipers are turned on. The headlights will also
turn off when the wipers are turned off if they
were turned on by this feature. To make your
selection, press the "Headlights With Wipers"
button on the touchscreen, until a check-mark
appears next to setting, showing that the setting
has been selected.
• Auto Dim High Beams — If Equipped
When this feature is selected, the high beam
headlights will activate/deactivate automatically
under certain conditions. To make your selec-
tion, press the "Auto High Beams" button on the
touchscreen, until a check-mark appears next
to setting, showing that the setting has been
selected. Refer to "Lights — If Equipped" in
"Understanding The Features Of Your Vehicle"
for further information.
• Daytime Running Lights — If Equipped
When this feature is selected, the headlights will
turn on whenever the engine is running. To
make your selection, press the "Daytime Run-
ning Lights" button on the touchscreen, until a
check-mark appears next to setting, showing
that the setting has been selected.
• Flash Lights With Lock
When this feature is selected, the hazard lights
will flash when the doors are locked or unlocked
with the Remote Keyless Entry (RKE) transmit-
ter, or when using the passive entry feature.
This feature may be selected with or without the
"Sound Horn on Lock" feature selected. To
make your selection, press the "Flash Lights
with Lock" button on the touchscreen, until a
check-mark appears next to setting, showing
that the setting has been selected.