Display Warnings And Maintenance - Dodge Challenger 2016 Operating Information Manual

Adaptive Cruise Control Ready
When ACC is activated but the vehicle speed
setting has not been selected, the display will
read "Adaptive Cruise Control Ready."
Push the SET + or the SET- button (located on
the steering wheel) and the following will display
in the DID:
ACC SET
When ACC is set, the set speed will display in
the instrument cluster.
The ACC screen may display once again if any
ACC activity occurs, which may include any of
the following:
• System Cancel
• Driver Override
• System Off
• ACC Proximity Warning
• ACC Unavailable Warning
• The DID will return to the last display se-
lected after five seconds of no ACC display
activity
98

Display Warnings And Maintenance

"Wipe Front Radar Sensor In Front Of
Vehicle" Warning
The "ACC/FCW Unavailable Wipe Front Radar
Sensor" warning will display and also a chime
will indicate when conditions temporarily limit
system performance.
This most often occurs at times of poor visibility,
such as in snow or heavy rain. The ACC system
may also become temporarily blinded due to
obstructions, such as mud, dirt or ice. In these
cases, the DID will display "ACC/FCW Unavail-
able Wipe Front Radar Sensor" and the system
will deactivate.
The "ACC/FCW Unavailable Wipe Front Radar
Sensor" message can sometimes be displayed
while driving in highly reflective areas (i.e. tun-
nels with reflective tiles, or ice and snow). The
ACC system will recover after the vehicle has
left these areas. Under rare conditions, when
the radar is not tracking any vehicles or objects
in its path this warning may temporarily occur.
NOTE:
If the "ACC/FCW Unavailable Wipe Front
Radar Sensor" warning is active Normal
(Fixed Speed) Cruise Control is still avail-
able. For additional information refer to
"Normal (Fixed Speed) Cruise Control
Mode" in this section.
If weather conditions are not a factor, the driver
should examine the sensor. It may require
cleaning or removal of an obstruction. The
sensor is located in the center of the vehicle
behind the lower grille.
To keep the ACC System operating properly, it
is important to note the following maintenance
items:
• Always keep the sensor clean. Carefully wipe
the sensor lens with a soft cloth. Be cautious
not to damage the sensor lens.
• Do not remove any screws from the sensor.
Doing so could cause an ACC system mal-
function or failure and require a sensor
realignment.