Wheel And Tire Torque Specifications; Torque Specifications - Dodge Challenger 2016 Operating Information Manual

5. Position the new Sealant Bottle (1) in the
housing so that the Sealant Hose (6) aligns
with the hose slot in the front of the housing.
Push the bottle into the housing. An audible
click will be heard indicating the bottle is
locked into place.
6. Verify that the cap is installed on the fitting at
the end of the Sealant Hose (6) and return
the hose to its storage area (located on the
bottom of the air pump).
7. Return the Tire Service Kit to its storage
location in the vehicle.
276
WHEEL AND TIRE TORQUE
SPECIFICATIONS
Proper lug nut/bolt torque is very important to
ensure that the wheel is properly mounted to
the vehicle. Any time a wheel has been re-
moved and reinstalled on the vehicle the lug
nuts/bolts should be torqued using a properly
calibrated torque wrench.

Torque Specifications

Lug Nut/Bolt **Lug Nut/
Torque Bolt Size
130 Ft-Lbs
M14 x 1.50
(176 N·m)
**Use only your Authorized Dealer recom-
mended lug nuts/bolts and clean or remove any
dirt or oil before tightening.
Inspect the wheel mounting surface prior to
mounting the tire and remove any corrosion or
loose particles.
Lug Nut/
Bolt
Socket
Wheel Mounting Surface
Size
Tighten the lug nuts/bolts in a star pattern until
each nut/bolt has been tightened twice.
22 mm