Performance Shift Indicator (Psi) - If Equipped - Dodge Challenger 2016 Operating Information Manual

Use the steering wheel DID controls for the
following procedure(s):
1. Without pushing the brake pedal, push the
ENGINE START/STOP button and place the
ignition in the ON/RUN position (do not start
the engine).
2. Push and release the DOWN
ton to scroll downward through the main
menu to "Vehicle Info."
3. Push and release the RIGHT
ton to access the "Oil Life" screen.
4. Push and hold the OK button to reset oil life.
If conditions are met, the gauge and numeric
display will update to show 100%. If condi-
tions are not met a popup message of "To
reset oil life engine must be off with ignition
in run" will be displayed (for 5 seconds), and
the user will remain at the Oil Life screen.
5. Push and release the UP
arrow button to exit the submenu screen.
NOTE:
If the indicator message illuminates when
you start the vehicle, the oil change indica-
tor system did not reset. If necessary, repeat
this procedure.
Secondary Method Of Resetting Engine Oil
Life
arrow but-
1. Without pushing the brake pedal, push the
ENGINE START/STOP button and place the
ignition to the ON/RUN position (do not start
arrow but-
the engine).
2. Fully push the accelerator pedal, slowly,
three times within 10 seconds.
3. Without pushing the brake pedal, push the
ENGINE START/STOP button once to return
the ignition to the OFF/LOCK position.
NOTE:
If the indicator message illuminates when
you start the vehicle, the oil change indica-
or DOWN
tor system did not reset. If necessary, repeat
this procedure.
Performance Shift Indicator (PSI) – If
Equipped
The Performance Shift Indicator (PSI) is en-
abled on vehicles with manual transmission, or
when a vehicle with automatic transmission is in
manual shift mode. The PSI provides the driver
with a visual indication within the DID display
when the driver configured gear shift point has
been reached and the driver is still accelerating.
This indication notifies the driver to change gear
corresponding to the configured RPMs in the
head unit. When the shift up indicator is shown
on the display, the PSI is advising the driver to
engage a higher gear.
The PSI indicator in the DID display remains
illuminated until the driver changes gear, or the
driving conditions return to a situation where
changing gear is not required, corresponding to
the configured RPMs in the head unit.
NOTE:
Refer to "Uconnect Settings" in "Under-
standing Your Instrument Panel" for further
information on enabling, disabling, and con-
figuring the Performance Shift Indicator.
147