SanDisk SSD X100
Reliability Characteristics
6.
Error Rate
6.1
Non-recoverable error rate is 1 error per 10
MTTF (Mean-Time-To-Failure)
6.2
The reliability figure of merit most often used for electronic equipment is Mean-Time-To-Failure
(MTTF). SanDisk estimates MTTF using a prediction methodology based in accordance with the
Telcordia Special Report SR-332. The prediction is based on a Parts Stress Analysis.
Quality levels were defined as industrial grade (I) for all of the components. The detailed
prediction for the system was performed at a temperature of 25°C in a GB environment.
The following table summarizes the estimated MTTF results for each capacity.
Capacity
32GB
Telcordia SR-332, GB, 25°C
64GB
Telcordia SR-332, GB, 25°C
128GB
Telcordia SR-332, GB, 25°C
256GB
Telcordia SR-332, GB, 25°C
512GB
Telcordia SR-332, GB, 25°C
© 2011 SanDisk® Corporation
Product Manual (Released)
16
bits read.
Condition
Table 6 -1: SanDisk SSD X100 MTTF
28
MTTF (Hours)
2,000,000
2,000,000
2,000,000
2,000,000
2,000,000
Document No. 80-11-01842
Rev 1.0