Reliability Characteristics; Error Rate; Useful Life; Mean Time Between Failure - SanDisk G3 Product Manual

Table of Contents

Advertisement

SanDisk G3 SSD

Reliability Characteristics

6.

Error Rate

6.1
In the event of a non-recoverable error, the device will report the host
that a read failure occurred. The data will be considered incorrect and will
be sent to the host.

Useful Life

6.2
The product life is at least 5 years under the following conditions:
Temperature, altitude, humidity and voltage within operating ranges
The drive should be protected from electrostatic discharge (ESD)
Note: Product life is defined as time in service at systems conditions while
maintaining compliance to the MTBF specification for the device.
The product life does not represent any warranty or warranty
period. Applicable warranty and warranty period are covered by the
purchasing agreement.

Mean Time Between Failure

6.3
Mean Time Between failure (MTBF) is calculated based on part stress
analysis.
The following conditions are set for calculation:
Ambient temperature = 25°C
Capacity (GB)
60, 120

Preventive Maintenance

6.4
No preventive maintenance is required.
© 2010 SanDisk® Corporation
Table 13: SanDisk G3 SSD MTBF
15
Product Manual
MTBF (hours)
2,000,000
Document No. 80-36-03426 Rev.4

Advertisement

Table of Contents
loading

Table of Contents