Ipx2 Kit Op16-58/Op16-59 - Furuno FELCOM18 Installation Manual

4. HOW TO INSTALL OPTIONAL EQUIPMENT
3. Attach the 51065-0700-PHR7-L110 connector assy. between J13 on the TERM-
CPU Board and J1 on the GPS board.
4. Attach the cable from the GPS board to J6 on the RF COMMCPU Board.
Use the clamp next to the connector to fix the cable.
5. Reassemble the terminal unit.
4.2

IPX2 Kit OP16-58/OP16-59

The optional kits OP16-58 and OP16-59 are used to protect the connectors on the ter-
minal unit from water splash. Note that these optional kits should be used as a pair.
4.2.1 OP16-58 (cables)
Connect the waterproofed D-sub cables to the rear of the terminal unit, instead of the
standard supply cable. For the connection at the IC-318, see section 4.3.
Name
Cable Assy.
4-2
J6
OP16-58 (Code No.: 001-180-070)
Type
H230817-1 001-176-552-10
H230817-2 000-176-553-10
XM-FD-361 000-176-551-10
Binding screw
M3x6, 3 pcs.
GPS board
J13
Code No. Qty
1
1
1