Furuno FELCOM18 Installation Manual page 31

DGPS port
(Coaxial cable connected)
1
Pass the coaxial cable
through the slit on the cover
for BNC (16-023-3534).
2
Attach the connector* of the
coaxial cable to the DGPS
port.
*For waterproofing, use the
connector assy. shown below:
-BNCP-58U-BNCP L-200
(000-161-953-11)
-BNCP-58U-BNCP L-290
(000-175-274-11)
3
Slide the cover for BNC on
the connector to cover the
connector. Confirm that the
triangle mark on the cover is
upward.
4. HOW TO INSTALL OPTIONAL EQUIPMENT
Cover for BNC Cover for BNC
USB suppor USB suppor
Triangle mark Triangle mark
4-5