Furuno FELCOM18 Installation Manual page 30

4. HOW TO INSTALL OPTIONAL EQUIPMENT
D-sub ports
1
Peel the paper from the
sponge for Dsub (16-023-
3531), then attach the sponge
to the D-sub connectors at the
rear of the terminal unit.
2
(Cables connected)
Connect the cables supplied
with OP16-58 to the appro-
priate ports.
(No cables connected)
Use the binding screws
(#4-40UNCx3/16) to fix the
dummy plates (for 9P, 15P
and 25P) to the appropriate
ports.
4-4
Sponge for Dsub Sponge for Dsub