Receiving A Phone Call; Making A Phone Call - Pioneer AVIC-Z1 Operation Manual

10
Touch [Information] in the navigation
menu, and then touch [Phone Menu].
11
Touch [Phone Settings].
The phone settings screen appears.
12
Touch [Password].
13
Touch any key to enter the password you
want to set and then touch [OK].
➲ About Keypad operation ➞ Page 27
❒ Four to eight characters can be entered for
a password.

Receiving a phone call

You can use the navigation system to receive a
call hands-free.
The map screen shows the icon while your cellu-
lar phone featuring Bluetooth wireless technol-
ogy is connected. You can recieve a hands-free
call only when the mobile phone is connected.
Answering an incoming call
The system informs you that it is receiving a call
by displaying a message and producing a ring
sound once.
1
When there is an incoming call, touch
.
When there is an incoming call, you can reject
the call by touching
❒ During a call, the
right-hand side of the screen.
84
Connecting icon
.
is displayed at the
2
To end the call, touch
of the screen.
The call ends.
❒ If the received voice is too quiet to hear, you
can adjust the volume of the received voice.
➲ Incoming Voice ➞ Page 91
❒ Depending on the subscription status of the
caller ID service, the phone number of the
received call may not be displayed, and
[Unknown] appears instead.
❒ You may hear a noise when you hang up the
phone.

Making a phone call

You can make a phone call in many different
ways.
Direct dialing
1
Touch [Information] in the navigation
menu, and then touch [Phone Menu].
2
Touch [Dial].
The phone settings screen appears.
3
Input the phone number, and then touch
to make a call.
To cancel the call after the system starts dial-
ing, touch .
4
To end the call, touch
of the screen.
at the top right
at the top right