Pioneer AVIC-Z1 Operation Manual page 85

12
Touch [Registration].
13
Touch [Mobile].
The navigation system waits for a Bluetooth
wireless technology connection.
14
Operate your cellular phone to register
the navigation system.
If your cellular phone asks you to enter a pass-
word, enter the password of the navigation
system.
After the registration is completed, the follow-
ing screen appears.
❒ If registration fails repeat the procedure
from the beginning.
Connecting a registered cellular phone
The navigation system automatically connects
the cellular phone selected as a target of connec-
tion. However, connect the cellular phone manu-
ally in the following cases:
• Two or more cellular phones are registered,
and you want to manually select the cellular
phone to be used.
• You want to reconnect a disconnected cellular
phone.
• Connection cannot be established automati-
cally for some reason.
❒ Unregistered cellular phones cannot be con-
nected.
1
Activate the Bluetooth wireless technor-
ogy on your mobile phone.
For some mobile phone no specific action is
necessary in activation for Bluetooth wireless
technorogy. For details, refer to the instruction
manual of your mobile phone.
2
Touch [Information] in the navigation
menu, and then touch [Phone Menu].
3
Touch [Phone Settings].
The phone settings screen appears.
Phone name currently connected or
selected as a target of connection
4
Touch [Connection].
5
Touch a cellular phone name you want to
connect.
When a connection is successfully estab-
lished, a connection complete message
appears, and the system returns to the phone
menu screen.
❒ To cancel the connection to your cellular
phone, touch [Cancel].
❒ If connection fails, check whether your cel-
lular phone is waiting for a connection,
and then repeat the procedure from step 4.
Editing the device name
You can change the device name to be displayed
on your cellular phone. (Default is [PIONEER
NAVI].)
6
Touch [Information] in the navigation
menu, and then touch [Phone Menu].
7
Touch [Phone Settings].
The phone settings screen appears.
8
Touch [Device Name].
9
Touch any key to enter the name you
want to set and then touch [OK].
➲ About Keypad operation ➞ Page 27
❒ Up to 20 characters can be entered for a
device name.
Editing the password
You can change the password to be used for
authentication on your cellular phone. (Default is
[1111].)
83