Touch Key Operation - Pioneer AVIC-Z1 Operation Manual

(7) XM station name logo
❒ The message "-ON THE AIR-" disappears
if the navigation system cannot receive XM
tuner reception for some reason.
❒ If you use GEX-P910XM,the logo for chan-
nel name is not available.
(8) Detail information
Shows the detail information of the broadcast
channel currently being received.
(9) Category icon
Shows the category icon for the selected chan-
nel.

Touch key operation

1
Touch the source icon and then touch
[XM] to select the XM.
When the source icon is not displayed, you
can display it by touching the screen.
Touch keys (GEX-P10XMT, GEX-P920XM)
Page 1 (All Ch Mode)
(3)
Page 1 (Category Mode)
(3)
Page 2
128
(1)
(2)
(5)
(4)
(6)
(11)
(2)
(5)
(4)
(6)
(7)
(8)
(9)
(10)
Touch keys (GEX-P910XM or GEX-P900XM)
Items marked with an asterisk (*) cannot be
used on GEX-P910XM or GEX-P900XM.
(1) Touch: Recalling channels from the pre-
set
Touch to recall the preset channel.
❒ In All Ch Mode, you can also recall the preset
channel by pressing the P.LIST ( / ) but-
ton.
❒ In Category Mode, the screen shows cate-
gory search.
Touch and hold: Storing broadcast stations
You can register the channel currently being
broadcast to the preset list.
❒ Up to 18 stations, 6 for each of three XM
bands can be stored in memory.
❒ If you use GEX-P910XM or GEX-P900XM, the
channel number does not appear on the
touch key.
(2) Perform manual tuning
The channels move up or down step by step.
❒ If you keep touching
can skip broadcasting channels.
❒ You can also perform these operations by
using the TRK ( / ) button.
(3) Switching to the list display*
You can select a desired channel from the list dis-
play.
➲ Selecting a channel from the XM channel list
display ➞ Page 129
(4) Switching the XM channel select mode
You can switch the mode between the two meth-
ods for selecting and listing the channel.
All Ch Mode :
You can select a channel from all channels when
you operate.
(12)
or you