Table of Contents
Advertisement
User's Guide
2. Slide the edge guides to adjust to the paper size you want to use.
3. Insert the paper with the printable side facing down until the printer partially pulls in the paper.
Important:
c
❏ Load paper short edge first. However, when you have set the long edge as the width of the user defined size,
load paper long edge first.
❏ Keep the paper straight to prevent it from being fed askew.
Note:
If the printer does not pull in the paper, load it again.
Related Information
"Paper Handling Precautions" on page 27
&
"Available Paper and Capacities" on page 27
&
Loading Envelopes and Precautions
Envelopes can only be loaded in the rear paper feed. Load envelopes short edge first at the center with the flap
facing down, and slide the edge guides to the edges of the envelopes.
Loading Paper
36
Advertisement
Table of Contents
