Table of Contents
Advertisement
User's Guide
❏ When images or photos are printed in unexpected colors, adjust the color and then print again. The automatic
color correction feature uses the standard PhotoEnhance correction mode. Try another PhotoEnhance
correction mode by selecting an option other than Auto Correct as the Scene Correction setting. If the
problem continues, use any other color correction feature other than PhotoEnhance.
❏ Disable the bidirectional (or high speed) setting. When this setting is enabled, the print head prints while
moving in both directions, and vertical lines may be misaligned. If you disable this feature, printing may slow
down.
❏ Windows
Clear High Speed on the printer driver's More Options tab.
❏ Mac OS X
Select System Preferences from the
then select the printer. Click Options & Supplies > Options (or Driver). Select Off as the High Speed
Printing setting.
❏ Perform a nozzle check, and then clean the print head if any of the print head nozzles are clogged.
❏ Align the print head. If your printouts contain horizontal banding or streaks after trying Print Head Cleaning
and Horizontal Alignment, select Menu > Maintenance > Improve Horizontal Streaks to finely tune the
horizontal alignment.
❏ Do not stack the paper immediately after printing.
❏ Dry the printouts completely before filing or displaying them. When drying the printouts, avoid direct sun light,
do not use a dryer, and do not touch the printed side of paper.
❏ Try to use genuine Epson ink cartridges. This product is designed to adjust colors based on the use of genuine
Epson ink cartridges. The use of non-genuine ink cartridges may cause print quality to decline.
❏ Epson recommends using the ink cartridge before the date printed on the package.
❏ For best results, use up ink cartridge within six months of installation.
❏ When printing images or photos, Epson recommends using genuine Epson paper rather than plain paper. Print
on the printable side of the genuine Epson paper.
Related Information
"Paper Handling Precautions" on page 27
&
"List of Paper Types" on page 30
&
"Adjusting the Print Color" on page 54
&
"Checking and Cleaning the Print Head" on page 82
&
"Aligning the Print Head" on page 83
&
"Improving Horizontal Streaks" on page 86
&
"Available Paper and Capacities" on page 27
&
The Position, Size, or Margins of the Printout Are Incorrect
❏ Load paper in the correct direction, and slide the edge guides against the edges of the paper.
❏ Select the appropriate paper size setting on the control panel or in the printer driver.
❏ Adjust the margin setting in the application so that it falls within the printable area.
Solving Problems
menu > Printers & Scanners (or Print & Scan, Print & Fax), and
109
Advertisement
Table of Contents
