Programming A Password (Av Mode Only); Setting And Changing The Password - Pioneer Elite PureVision PRO 1110HD Operating Instructions Manual

Useful Adjustment Settings
Programming a password
(AV mode only)
You can program a password to prevent other persons
from changing especially Parental Control settings.

Setting and changing the password

Use the following procedure to newly set or change the
password:
1
Press HOME MENU.
2
Press / to select "Setup", and then press
ENTER.
3
Press / to select "Password", and then press
ENTER.
• If you have set a password, the password entry
screen appears. Enter your 4-digit password
using buttons 0 – 9.
• The factory default is "1234".
4
Press / to select "Change Password", and then
press ENTER.
5
Enter a 4-digit password to be newly set, using
buttons 0 – 9.
Change Password
Please Input New Password.
Reconfirm New Password.
PDP-ELITE-Eng (81-96) 95
6
Enter the same password that you have entered in
step 4, using buttons 0 – 9.
Change Password
Please Input New Password.
Reconfirm New Password.
7
Press HOME MENU to exit the menu.
• Take a note of the newly set password and keep it
handy.
9/9/03, 11:47
12
* * * *
95
En