Setting Up Conventional Tv Channels; Using Auto Channel Preset - Pioneer Elite PureVision PRO 1110HD Operating Instructions Manual

Basic Adjustment Settings

Setting up conventional TV channels

This section describes how to search and set up
conventional TV channels that you can watch under the
current conditions. Unless you set up conventional TV
channels using Auto channel Preset, you may not be
able to tune in those channels.
• Conventional TV channels in this manual designate
TV channels that are received through the conven-
tional VHF/ UHF frequencies or conventional cable TV
channels.

Using Auto Channel Preset

Auto Channel Preset automatically searches and sets
up conventional TV channels.
1
Press HOME MENU.
2
Press / to select "Setup", and then press
ENTER.
3
Press / to select "Channel Setup", and then
press ENTER.
4
Press / to select "Auto Channel Preset", and
then press ENTER.
5
Press / to select "Antenna", and then
/
press to select "A" or "B".
Auto Channel Preset
Antenna
Air/Cable
Preset
6
Press / to select "Air/Cable", and then
/
press to select "Air" or "Cable".
Auto Channel Preset
Antenna
Air/Cable
Preset
PDP-ELITE-Eng (40-56)
A
Air
Start
A
Air
Start
41
7
Press / to select "Preset:Start", and then press
ENTER.
Auto Channel Preset
Antenna
Air/Cable
Preset
• Channel search automatically starts.
Please wait.
Auto channel preset searching.
To cancel auto channel preset,
press [RETURN].
• To quit Auto Channel Preset halfway, press
RETURN.
8
After Auto Channel Preset has been finished,
press HOME MENU to exit the menu.
• When using the Cable Converter, you may need to
manually add Cable Converter output channels.
9/9/03, 11:45
09
A
Air
Start
PLASMA DISPLAY
41
En