Basic Operations; Turning On The Power - Pioneer Elite PureVision PRO 1110HD Operating Instructions Manual

08

Basic Operations

Plasma Display
POWER ON indicator
POWER button
STANDBY/ON button
Media Receiver
STANDBY indicator
POWER ON indicator
POWER button
28
En
PDP-ELITE-Eng (28-37)
STANDBY indicator
(right view)
28

Turning on the power

1
Press POWER on the Plasma Display.
• The STANDBY indicator on the Plasma Display
flashes red.
2
Press POWER on the Media Receiver.
• The system is turned on or placed into the
standby mode.
3
Confirm that the STANDBY indicators light up red,
and then press TV a on the remote control unit
or STANDBY/ON on the Plasma Display to turn
the system on.
• The POWER ON indicators on the Plasma
Display and Media Receiver light up green.
• In this manual, "system" means the Plasma Display
Panel and Media Receiver.
• You can also reverse steps 1 and 2.
9/9/03, 11:44