Cable Connections For Watching Conventional Tv Channels; Connecting A Vhf/Uhf Antenna; Connecting A Cable Converter - Pioneer Elite PureVision PRO 1110HD Operating Instructions Manual

07 Preparation

Cable connections for watching conventional TV channels

In order to watch conventional TV channels, connect coaxial cables as shown below. To enjoy a clearer picture, use
an outdoor antenna. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector, plug it into the
antenna terminal at the rear of the Media Receiver.

Connecting a VHF/UHF antenna

VHF antenna
U/V mixer

Connecting a Cable Converter

Cable TV
Cable Converter
24
En
PDP-ELITE-Eng (17-27)
UHF antenna
24
Media Receiver (rear)
I N I N
OUT OUT
A ANTENNA/CABLE B
Media Receiver (rear)
I N I N
OUT OUT
A ANTENNA/CABLE B
When making the above connections, first
remove the coaxial cable attached before
shipment.
9/9/03, 11:44
The coaxial cable is
already connected at
the time of purchase.