JVC NX-MD1R Service Manual page 16

NX-MD1R/NX-MD1
Removing the woofer speaker (See Fig.4)
Prior to performing the following procedure, remove
the front cover.
1. Remove the four screws A on the front of the body.
2. Pull out the woofer speaker toward the front and
disconnect the wire (yellow and black,blue and
black) from the two speaker terminals.
Removing the tweeter speaker
Prior to performing the following procedure, remove
the front cover.
1. Remove the two screws B
speaker on the back of the front cover.
1-16
(See Fig.5)
attaching the tweeter
A
Woofer speaker
Fig.4
B
Front cover
Fig.5
A
Tweeter speaker