Other Recording Settings; Video Encode Rate Settings; Prv-Lx10 - Pioneer PRV-LX10 Operating Instructions Manual

Recording

Other Recording Settings

Function Menu's SET UP section = [Recording]:
This command also allows the following settings:
Video Encode Rate:
Video Filter (NR):
Audio Encode:
Audio Level:
Aspect:
Setup Level:
Auto Chapter:
REC Button:
SET UP section = [Recording] = [Video/Audio]
Note 1:
"LPCM" cannot be selected when "DV" is set as
the input.
Note 2:
Cannot be selected when "PAL" is selected as the
TV system.
36

PRV-LX10

En
32 levels
16 levels
Dolby Digital / LPCM (Note1)
–48 dB to +14 dB
4:3 / 16:9
0 IRE / 7.5 IRE (Note2)
Manual / Automatic
(at 3/5/10/15/30/60
minutes intervals)
REC Start /
Standby = REC

Video Encode Rate Settings

The SET UP section = [Recording] = [Video/
Audio] = [Video Encode Rate] command allows
you to set the encoding rate for recording. This
setting affects the recording time and the transfer
rate (image quality). See pages 78 and 79 for
information on the relationship between encoding
rate and recording time/transfer rate.
The encode rate can be set either as a step between
step 1 to 32 or as a recording time value. The
recording time value is converted to the step that is
closest to the set time.
SET UP section = [Recording] = [Video/Audio]
= [Video Encode Rate] Step change
SET UP section = [Recording] = [Video/Audio]
= [Video Encode Rate] Time change