Pioneer PRV-LX10 Operating Instructions Manual page 27

7 OSD during Recording
When the DISPLAY button is pressed during recording, the OSD projects the unit's recording status and
playback condition (during time shift playback), thus allowing confirmation of these items.
In the recording mode, the OSD screen is composed of two pages, a simple (reduced clutter) page, and a
detailed information page. The first two times the DISPLAY button is pressed, the OSD alternates between
the two pages; when the button is pressed a third time, the OSD is turned off.
Main unit button
Remote control unit
Playback status
Recording status
Video encode rate Video filter level
Status Confirmation Using Onscreen Display (OSD)
Recording status Recording title/chapter
Playback Playback title/chapter
status (Note 3)
OSD during Recording (page 1)
Note 2:
The recording time is the same as the time for the input video image;
this differs from the output video image time (which is subjected to
encoding/decoding).
Note 3:
Playback status is shown only during time shift playback.
(Note 4)
Playback title/chapter
Recording title/chapter
Video input Audio input
OSD during Recording (page 2)
Note 4:
Playback status is shown only during time shift playback.
Recording time
(Note 3) Playback time
(Note 4)
Remaining
HDD capacity
Recording time
Playback time
Remaining recording time
(Note 2)
(Note 3)
(Note 4)
27
PRV-LX10
En