Pioneer PRV-LX10 Operating Instructions Manual page 82

Function Menu Table
EDIT Title Title Selection
DVD Disc Finalize
Initialize
Unfinalize
Make Disc
Make Image
APP Auto Capture IN/OUT Point
Chapter Point
EDL Command
EDL
EDL Load/Delete
EDL Save
Cpy/Impt/Bkup Disc Copy
Disc Image Copy
Note: Items in bold type are backed up and restored in the section "Backing up and Restoring System
Settings" (page 77).
82
PRV-LX10
En
Clip 1 CLEAR/ALL CLEAR/UP/DOWN/
CLIP LIST
Clip 2
Clip 3
Clip 4
Clip 5
Next Page
Finalize Selected Drive
Initialize Quick Format
Full Blank
Unfinalize Selected Drive
Target DVD1
DVD2
DVD1&2
Target Image File Name Input
Preroll Time 1 - 5 - 10 Seconds
Offset(Frame) 0 -- 17 -- 30 Frame
Record As Title(Stop)
Chapter(Pause)
Pause
IN/OUT Point (Time Code Setting)[Mark]
Chapter Point (Time Code Setting)[Mark]
Command Finalize
Initialize
Wait
IN/OUT Point 1 CLEAR/ALL CLEAR/UP/DOWN
IN/OUT Point 2
IN/OUT Point 3
IN/OUT Point 4
IN/OUT Point 5
Next
Load EDL List
Delete EDL List
Save To File Name Input
Source DVD1
DVD2
Destination DVD1
DVD2
Source DVD1
DVD2
Input Image Name File Name Input
Display the clip with the assigned title
and edit in order.
DVD finalize.
Use Quick Format to initialize DVD-
RW disc.
Erase all DVD-RW contents.
Canceling finalization of DVD-RW.
Select destination for recording
selected project to disc and execute.
Enter the name for the selected project
and create disc image file.
Set pre-roll time.
Set frame offset.
Select OUT point operation.
Set IN/OUT point.
Set chapter point.
Designate additional special
command to EDL.
Perform editing of EDL.
Loads selected EDL.
Delete selected edit list.
Save EDL or save with new name.
Select copy source.
Select copy destination.
Select the copy source.
Enter the filename of the file to be
created.