Pioneer PRV-LX10 Operating Instructions Manual page 91

Item
PROJECT Not enough space in HDD.
Make Disc Data size is over 4.7GBytes.
Make Disc The size of menu is too large.
Make Disc There is no disc.
Make Disc This is not a blank disc.
Make Disc The disc needs to be initialized.
Make Disc This is an illegal disc.
Make Disc There is no title.
Make Disc The number of titles is over 99.
Make Disc Make disc failed.
Make Disc Current TV System differs from a menu clip TV
System.
Make Disc Different audio encoding formats can't exist in
intro and idle clips.
Make Image Invalid target file name.
Make Image Not enough space in HDD.
Trimming Do you want to update or create a new clip ?
Trimming This VOB can't be trimmed.
Trimming New clip can't be created unless duration is under
HH:MM
Trimming Please cut clip less than HH:MM
Trimming New clip can't be created.
Clips should be less than 255.
Divide Do you want to update or create a new clip?
Divide This VOB can't be divided.
Divide There is no remaining capacity.
New clip can't be created.
Divide There is no remaining capacity.
This VOB can't be divided.
Divide There are too many clips.
Over 255 clips can't be created.
Divide The number of titles is 99.
This VOB can't be divided.
Divide The number of clips is 255.
This VOB can't be divided.
Initialize Library Do you really want to Initialize?
Delete Library Default Layout/Background can't be deleted.
Delete Library Please select Layout/Background before delete.
Delete Library Do you really want to delete ******
Message
No free space left on the hard disk. Delete projects no longer
needed to provide enough space for recording.
The current project title capacity exceeds 4.7 GB. Use the Title
editing [Title Selection] command to reduce the number of
titles, or use trimming editing to shorten the length of titles.
The attached menu size is too large for the current project title
composition. Change to a menu design with more buttons on
each page of the menu. Also, by changing to title menu, it may
be possible to construct the menu with a smaller volume.
No disc has been loaded in the designated drive.
The designated disc has recorded contents.
The designated disc has not yet been initialized. Initialization
is necessary before recording.
The designated drive contains an improper disc.
No title has been assigned.
99 titles already exist.
A DVD-Video disc can hold a maximum of 99 titles.
Disc could not be created. A disc fault may have occurred.
The current TV system mode must be the same as that of the
menu clip.
The menu clips must have the same audio type.
See "About File Names" (page 94).
The hard disk does not have sufficient empty space to
create the file.
Select whether to save the edited data to a new file or to
overwrite the original file.
This VOB cannot be trimmed.
Not enough space on the hard disk to save as a separate item
to disk. Overwriting is possible. The item can be saved
separately if trimming time is HH:MM or less.
Not enough space on the hard disk for trimming. Trimming is
possible if trimming time is HH:MM or less.
Too many clips already exist, so cannot create a new one. To
save new clip, reduce the number of existing clips.
Confirm whether you wish to overwrite edited results or create
a new clip.
This VOB cannot be divided.
The hard disk has insufficient space to create a new clip. Can
only overwrite previous clip.
The hard disk has insufficient space to allow division of the
clip.
Too many clips already exist, so cannot create a new one.
Too many titles already exist, so cannot divide the VOB.
Too many clips already exist, so cannot divide the VOB.
Initializes library. This deletes imported libraries.
Layouts and background images set in the default menu cannot
be deleted.
Select layout/background image to delete.
The ****** file will be deleted.
Message Display
Comment
91
PRV-LX10
En