Pioneer PRV-LX10 Operating Instructions Manual page 84

Function Menu Table
SET UP System System Settings
F-Key Set 1-6
F-Key Set 7-12
Network
UPS Setting
Information
*1: During playback, initiates slow playback.
*2: During playback, initiates slow reverse playback.
*3: When PAL is selected as the TV system, automatically set to Component.
*4: Disabled and reserved for future expansion. Performs no function and should not be set.
84
Note: Items in bold type are backed up and restored in the section "Backing up and Restoring
System Settings" (page 77).
PRV-LX10
En
Key Repeat Speed Slow
Medium
Fast
Mouse Generic
Mouse Speed Slow
Medium
Fast
Time Zone –12 to +13, City Name
Date(mm/dd/yyyy) xx/xx/2xxx
Time(hh:mm:ss) xx:xx:xx
F-Key Enable F-Key Only
Ctrl + F-Key
Shift + F-Key
Not Set
F1
Display
Function
F2
Drive Select
Function/Back
F3
Preview
REC
F4
Play
Pause
F5
Stop
Scan Fwd
F6
Scan Rev
Skip Fwd
Skip Rev
F7
Slow Fwd (
*
Slow Rev (
F8
Step Fwd
Step Rev
F9
Local/Remote
Composite out
F10
Finalize
Initialize
F11
Unfinalize
Make Disc
F12
EDL Rec
Network OFF
ON
DHCP/Manual DHCP
Manual
IP Address xxx.xxx.xxx.xxx
Subnet Mask xxx.xxx.xxx.xxx
Gateway xxx.xxx.xxx.xxx
Mac Adress xx:xx:xx:xx:xx:xx
Model Disabled
APC Smart-UPS 500
APC Smart-UPS 750
Shutdown Delay 30 seconds
60 seconds
System Version Application Ver / OS Ver
Power-On Time Total Hours
HDD Access Total Hours
Drive 1(R/W) Read/Write Time
Drive 2(R/W) Read/Write Time
Service Info HDD Smart/PCI Error
Select key repeat speed.
Select mouse type.
Select mouse cursor movement
speed.
Select time zone.
Set date.
Set time.
Select key combinations for function
key operation.
DV Out
Set allocation to function key F1.
VIN(Composite)
VIN(S-Video)
Set allocation to function key F2.
VIN(Beta) ( * 3)
VIN(SMPTE) ( * 3)
Set allocation to function key F3.
IN(DV)
AIN(RCA)
Set allocation to function key F4.
AIN(XLR)
Menu
Set allocation to function key F5.
Top Menu
Return
Set allocation to function key F6.
Repeat
Repeat A-B
Audio
Set allocation to function key F7.
* 1) Angle
2)
Subtitle
Set allocation to function key F8.
Title/Chp/Time
Time
Set allocation to function key F9.
Search
>10
Set allocation to function key F10.
TV System
* 4)
Reserved (
Set allocation to function key F11.
4)
Reserved ( *
4)
Reserved ( *
Set allocation to function key F12.
* 4)
Reserved (
Select whether to enable network.
Select IP address setting method.
Select manual IP address.
Select manual sub-net mask.
Select manual gateway address.
Display MAC address.
Select UPS.
Select time until shutdown via UPS.
Display system version.
Display total power-on time.
Display HDD access time.
Display Drive 1 operating time.
Display Drive 2 operating time.
Display Smart information on hard
disk or information on internal PCI bus.