Pioneer PRV-LX10 Operating Instructions Manual page 85

SET UP System HDD Tools
Operation Control Settings
Video Settings
HDD Recording
Info Language
Recording Video/Audio
*5: Displayed only when USB HDD is connected.
*6: Displayed only when [V Input] is set to "DV".
*7: Playback begins about 5 seconds after pressing the PLAY button on front panel/remote
control unit.
*8: Not displayed when TV system is set to PAL.
Target Drive HDD
USB HDD (*5)
Remaining Capacity xxxxGB
Control Local
Remote
Port RS-422A
Disabled
IEEE1394 (*6)
Time Code RS-422A
LTC
IEEE1394 (*6)
Eject Settings Eject
Finalize & Eject
External Sync Disabled
Enabled
OSD Enabled
Disabled
Composite Out Source Monitor
Decoder Out
Background Color Black
Blue
DV OUT Enabled
Disabled
Test Signal Start
Time Shift PLAY Enabled
Disabled
Language English(GB)
Français
Deutsch
Español
Svenska
Video Encode Rate 32 Levels Setting
Video Filter(NR) 16 Levels Setting
Audio Encode Dolby Digital
LPCM
Audio Level (L) –48 to +14 setting
(R) –48 to +14 setting
(L/R) –48 to +14 setting
Aspect 4:3
16:9
Setup Level (*8) 0 IRE
7.5 IRE
Function Menu Table
Format and confirm operation of data
area of HDD.
Display hard disk or USB HDD free
space.
Switch external control.
Select external control port.
Select time code input.
Select Eject command operation.
Select external sync signal for
playback.
Enable/disable OSD display.
Enable/disable input pass-through for
composite/RCA output.
Select background image during
idling.
Enable/disable DV connector output.
When enabled, outputs during
playback only. ( * 7)
Output color bar.
Enable/disable playback of previous
recorded portion during recording
(time-shift recording).
Select language for information
display and character input on
Function Menu.
Set encoding rate.
Set video filter level.
Select audio encoding format.
Set audio level.
Select video aspect ratio.
Select setup level.
PRV-LX10
85
En