Other Settings You Can Make - Pioneer DVR-520H Operating Instructions Manual

Getting started
Set the date (day/month/year) and time, then
press ENTER to make all the settings.
Initial Setup
Basic Manual Clock Setting
Clock Set
Tuner
Input Line System
Date
Video In/Out
On Screen Display
Audio In
Front Panel Display Time
Audio Out
Power Save
Time Zone
Language Remote Control Set
Recording Setup Navigator Setup Navigator
Summer Time
Playback
Use the (cursor up/down) buttons to change
the value in the highlighted field.
Use the (cursor left/right) buttons to move
from one field to another.
• You can go back to the previous screen at anytime in
the Setup Navigator by pressing RETURN.
7 Select the TV screen type, 'Standard (4:3)' or
'Wide (16:9)'.
Initial Setup
Basic Clock Set TV Screen Size
Input Line System
Tuner
On Screen Display
Video In/Out
Front Panel Display
Audio In
Power Save
Audio Out
Remote Control SetSetup Navigator
Language
Recording Setup Navigator
Playback
Use the (cursor up/down) buttons to select, then
press ENTER.
8 Is this recorder connected to an AV amplifier/
receiver for digital audio?
Initial Setup
Basic Clock Set AV Amp Digital Connect
Input Line System
Tuner
On Screen Display
Video In/Out
Front Panel Display
Audio In
Audio Out Power Save
Language Remote Control Set
Recording Setup Navigator Setup Navigator
Playback
Use the (cursor up/down) buttons to select
Connected, or Not Connected, then press ENTER.
• If you select Not Connected, that completes the
setup. Press ENTER to exit the Setup Navigator, or
select Go Back if you want to go back and start again.
• Select the digital audio formats your AV amplifier/
receiver is compatible with.
Initial Setup
AV Amp Compatibility
Basic Clock Set
Tuner Input Line System
Video In/Out On Screen Display
Audio In Front Panel Display
Audio Out Power Save
Language Remote Control Set
Recording Setup Navigator Setup Navigator
Playback
2/2
THU 01 01 2004
00 00
England
London
On
Wide (16:9)
Standard (4:3)
Connected
Not Connected
Dolby Digital
Dolby Digital, DTS
PCM only
(cursor up/down) buttons to select Dolby
Use the
Digital, Dolby Digital, DTS or PCM only, then press
ENTER.
• Check the operating instructions that came with your
AV amplifier/receiver if you're not sure what it's
compatible with.
9 Is your AV amplifier/receiver compatible with 96
kHz PCM digital audio?
Initial Setup
96kHz PCM Compatible
Basic Clock Set
Tuner Input Line System
Video In/Out On Screen Display
Audio In Front Panel Display
Audio Out Power Save
Language Remote Control Set
Recording Setup Navigator Setup Navigator
Playback
Use the (cursor up/down) buttons to select
Compatible, Not Compatible, or Don't Know, then
press ENTER.
• Check the operating instructions that came with your
AV amplifier/receiver if you're not sure.
10 Press ENTER to exit the Setup Navigator, or select
'Go Back' if you want to start again.
Initial Setup
Basic Clock Set
Tuner
Input Line System
Setup is complete!
Video In/Out
On Screen Display
Enjoy using your DVD recorder!
Audio In
Front Panel Display
Audio Out Power Save
Language Remote Control Set
Recording Setup Navigator Setup Navigator
Playback
That completes basic setup using the Setup Navigator.

Other settings you can make

After setting up using the Setup Navigator, you should be
ready to start enjoying your DVD recorder. It's possible,
however, that you may want to make a couple of
additional settings, depending on how the recorder is set
up for terrestrial TV broadcasts.
• Manual channel setting – This setting lets you skip
channels where there is no station, as well as
manually tune to stations. See Manual CH Setting on
page 100.
• VIDEO Plus+ channel setting – This setting lets you
assign guide channels to ensure that the VIDEO
Plus+ programming system works correctly. See Set
VIDEO Plus+ CH on page 101.
• Setting up the remote to control your TV – You can set
up the supplied remote control to control many
brands of TV. See Setting up the remote to control your
TV on page 112.
Compatible
Not Compatible
Don't Know
Finish Setup
Go Back
04
27
En