Recording The Copy List; Hdd To Dvd Copy List Commands - Pioneer DVR-520H Operating Instructions Manual

Pioneer dvd recorder operating instructions
Table of Contents

Advertisement

Copying and back-up

Recording the Copy List

After putting together your Copy List, you're ready to
record it.
1
Select 'Conf List' to display the Copy List settings
screen.
2
Use the
(cursor left/right) buttons to select
the Recording Mode.
HDD to DVD Copy
HDD
HDD
DVD-RW VIDEO
Recording Mode
Add
Erase
Copy List Total
Ttl Name
Current DVD Remain
Divide
Combine
Conf List
• High-Speed Copy – The Copy List is copied at the
same recording quality as the original. (See page 61
for more information on high-speed copying.)
• FINE, SP, LP, EP, MN – The Copy List is copied at the
specified recording quality in real-time. (Note that if
you copy at a higher quality setting than the original,
the copy will not be better quality than the original.)
• If you select MN above, you can also change the level
setting (MN1–MN32) from the Recording Quality box
that appears.
• Optimized – The recording quality automatically
adjusted so that the Copy List fits on to the space
available on the disc. Copying is carried out in real-
time.
When you change the recording mode setting, you can
see how much disc space it will require. If this is more
than is available, it shows up in red and you won't be able
to start copying. In this case, either change the recording
quality, or press RETURN to go back to the Copy List
screen and erase one or more titles from the Copy List.
3
Select 'Start' to begin copying.
Note
• When the copy mode is set to something other than
High-Speed Copy for copying to a Video mode DVD,
the chapter markers of the original are not copied.
Chapter markers are put into the copy at regular
intervals, according to the Auto Chapter setting (see
also Auto Chapter (Video) on page 108).
Required 0h08m
High Speed
Start
1175MB
2830MB
/ 4700MB

HDD to DVD Copy List commands

Add
Use this command to add titles to the Copy List.
1
Select 'Add' from the Copy List menu options.
2
Use the
(cursor left/right) buttons to select
a title from the HDD to add to the Copy List, then
press ENTER.
HDD to DVD Copy
All
HDD
1
HDD
HDD
16:00 Sun 11/8
Recording Time
Add
DVD
DVD
1
Erase
Ttl Name
Divide
Copy List
Combine
Conf List
The thumbnail appears in the Copy List section in the
lower half of the screen. If there are already titles in the
Copy List, the title is added at the end.
3
Repeat step 2 to add more titles to the Copy List,
or press RETURN to go back to the Copy List menu
options.
Note
• When Frame Accurate is set to Off (see Frame
Accurate on page 108), the following limitations on
adding titles to the Copy List apply:
– When adding titles that contain copy-once
protected material, the copy-once parts will not be
added to the Copy List.
– When adding titles that contain material of more
than one aspect ratio (screen size), each part with a
different aspect ratio will be added as a separate title.
– Widescreen material recorded in LP, EP or MN1–18
will not be added to the Copy List.
– Chapter markers on the copy may be up to 0.5
seconds off compared to the original.
• Only titles which were recorded in the same TV
system as the recorder is currently set to can be
added to the Copy List.
2
3
4
1/3
Pr 5 LP
0h32m55s
2
3
4
1/2
Total 1h30m
07
65
En

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dvr-720hDvr-420h

Table of Contents