Display - Pioneer DVR-520H Operating Instructions Manual

03 Controls and displays

Display

1
1
Arrows indicate the copy direction between the HDD
( ) and DVD (
2 PLAY /
Lights during playback / recording; blinks when playback
/ recording is paused.
3
The ' ' and ' ' indicators light to indicate that the HDD
or DVD is selected for recording/playback.
4 PL (page 78, 84)
Lights when a VR mode disc is loaded and the recorder is
in Play List mode.
5 2 3 (page 99)
Shows the remote control mode (if nothing is displayed,
the remote control mode is 1).
6 REM
Lights when the character display is showing the
remaining available recording time.
7 V
Lights when an unfinalized Video mode disc is loaded.
8 R / RW
Indicates the type of recordable DVD loaded: DVD-R or
DVD-RW.
9
(page 49)
Lights when a timer recording has been set.
(Indicator blinks if the timer has been set to DVD but
there isn't a recordable disc loaded, or the timer has
been set to HDD but the HDD is not recordable.)
AUTO (page 56)
Lights when Auto Start Recording has been set, and
during Auto Start Recording.
22
En
2 3 4
).
REC indicators
(page 28)
5 6 7
11
10 Recording quality indicators (page 46)
FINE
Lights when the recording mode is set to FINE (best
quality).
SP
Lights when the recording mode is set to SP
(standard play).
LP
Lights when the recording mode is set to LP (long
play).
EP
Lights when the recording mode is set to EP
(extended play).
MN
Lights when the recording mode is set to MN
(manual recording level) mode.
11 Character display
12
(page 104)
Indicates which channels of a bilingual broadcast
are recorded.
13 VPS / PDC (page 49)
Lights when receiving a VPS/PDC broadcast during a
VPS/PDC-enabled timer recording.
14 NTSC
Lights when playing NTSC format video.
15 OVER (page 104)
Lights when the analog audio input level is too high.
8 9 10
12 13 14 15