Other Settings You Can Make - Pioneer DVR-310-S Operating Instructions Manual

Getting started
Use the (cursor up/down) buttons to select
Compatible, Not Compatible, or Don't Know, then
press ENTER.
• Note that progressive scan video is only output
through the component video outputs (see page 14).
9 Is this recorder connected to an AV receiver for
digital audio?
Initial Setup
AV Amp Digital Connect
Basic
Clock Set
Tuner
On Screen Display
Video Out
Front Panel Display
Audio In
Remote Control Set
Audio Out
Setup Mavigator Setup Mavigator
Language
Recording
Playback
Use the (cursor up/down) buttons to select
Connected, or Not Connected, then press ENTER.
• If you select Not Connected, that completes the
setup. Press ENTER to exit the Setup Navigator, or
select Go Back if you want to go back and start again.
10 Select the digital audio formats your AV receiver
is compatible with.
Initial Setup
AV Amp Compatibility
Basic
Clock Set
Tuner
On Screen Display
Video Out
Front Panel Display
Audio In
Remote Control Set
Audio Out
Setup Mavigator Setup Mavigator
Language
Recording
Playback
(cursor up/down) buttons to select Dolby
Use the
Digital, Dolby Digital, DTS or PCM only, then press
ENTER.
• Check the operating instructions that came with your
AV receiver if you're not sure what it's compatible
with.
11 Is your AV receiver compatible with 96 kHz
digital audio?
Initial Setup
96kHz PCM Compatible
Basic
Clock Set
Tuner
On Screen Display
Video Out
Front Panel Display
Audio In
Remote Control Set
Audio Out
Setup Mavigator Setup Mavigator
Language
Recording
Playback
Use the (cursor up/down) buttons to select
Compatible, Not Compatible, or Don't Know, then
press ENTER.
• Check the operating instructions that came with your
AV receiver if you're not sure.
Connected
Not Connected
Dolby Digital
Dolby Digital, DTS
PCM only
Compatible
Not Compatible
Don't Know
12 That's it! Press ENTER to finish setting up, or
select 'Go Back' if you want to start again.
Initial Setup
Basic
Clock Set
Tuner
On Screen Display
Setup is complete!
Video Out Front Panel Display
Enjoy using your DVD recorder!
Audio In Remote Control Set
Audio Out Setup Mavigator
Setup Mavigator
Language
Recording
Playback

Other settings you can make

After setting up using the Setup Navigator, you should be
ready to start enjoying your DVD recorder. It's possible,
however, that you may want to make a couple of
additional settings, depending on how the recorder
tuned into the terrestrial TV channels.
• Manual channel setting – This setting lets you skip
channels where there is no station, as well as
manually tune to stations. See Manual CH Setting on
page 73.
• VCR Plus+ channel setting – This setting lets you
assign guide channels to ensure that the VCR Plus+
programming system works correctly. See VCR
Plus+ CH Setting on page 73.
That completes basic setup using the Setup Navigator.
• Setting up the remote to control your TV – You can set
up the supplied remote control to control many
brands of TV. See Setting up the remote to control your
TV on page 83.
Finish Setup
Go Back
04
25
En